PTH 700/660 E is one of the medium power machines within Pezzolato drum chippers, whose drum diameter measures 660 mm (25.98”).
Its feeding mouth is 640 mm (25.20”) wide.
Able to produce up to 50 m³ chips per hour, it guarantees high throughput.
Mainly used in: biomass power plants, pellet-briquettes plants, saw mills and yards for chipping. It is ideal to chip saw mills waste and small diameter logs. They are equipped with three electric motors, one driving the drum and the other two driving the rollers, upper and lower. The feeding is given by the use of rubber bands, vibrating channels and tables, chain conveyors.
Powered by electric motor of 75kW.
Thanks to the closed drum, it produces high quality chips, whatever wood is cut, considerably reducing fuel consumption.
The sharp cut through the blades and the drum’s inertia reduce the machine’s efforts and stress, thus confirming the well-known solidity of Pezzolato wood chippers.
The wear parts of all machines are simple to replace in short maintenance times and cheap.
The electronic controller suggests any ordinary and extraordinary maintenance operations to be performed according to the manufacturer’s maintenance plan.
Chipping dimeter and declared production are variable according to the available power, wood type and chips size.
TECHNICAL DATA | PTH 700/660 E | ||
---|---|---|---|
Electric motor power | kW/hp | 110 kW / 148 hp | |
Maximum inlet passage | mm/in | 640 x 400 mm / 25.20 x 15.75'' | |
Knives | n° | 3 | |
Hourly throughoutput | m³/h | 40 ÷ 50 | |
Drum diameter | mm/in | 660 mm / 25.98'' | |
Drum width | mm/in | 640 mm / 25.20'' | |
Upper rollers | n° | 1 | |
Lower roller | n° | 2 |
LOADING TABLE WITH CLOSED CHAINS
Loading table with closed chains especially suitable for mixed material; both large and small wood pieces are smoothly delivered into the feeding conveyor, thus preventing any special waste.
SIEVE FOR CHIPS
For the refining and sifting of the chipped wood
TANK FOR LOADING WOOD CHIPS
Tank for loading wood chips produced by external machinery. Chips can be loaded and integrated into the cycle, in order to be sieved
METAL DETECTOR
Metal detector to defect possible metal foreigh bodies before feeding, preventing damage to the machine
VIBRATING CONVEYOR
Vibrating conveyor to compact the material to avoid the wood clogging.
CHARGER FOR SHORT LOGS
Charger for short logs with multiple feeding chains and side walls where short logs can be loaded in bulk
LOADING STATION FOR SLABS
To stock the material to be processed in big quantities and optimise working cycles.
LOG LOADER
The best loader is provided according to the wood to be processed.
UNLOADING CHAIN CONVEYORS
Able to discharge the chips at any height or distance, to easily allow direct loading into vehicles
ROTATING CONVEYORS
These allow loading of several trucks even if they are located in different positions.
SIEVING GRIDS
Sieving grids for chip calibration with different sizes, easy to replace
- STATIONARY CRANE
Stationary crane for systems with operator feeding.
- HIGH EFFICIENCY ELECTRIC ENGINE
High efficiency electric engine with adequate power, it ensures low fuel consumption and less noise.
- SOUNDPROOF CABIN
Soundproof cabin protects the operator from the noise and dust.
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US