PTH 1200/1000

GREENLINE Chippers Camion motor - HackerTRUCK

PTH 1200/1000
GREENLINE Chippers Camion motor - HackerTRUCK

The chipper PTH 1200/1000 HACKERTRUCK is one of the heavy duty machines within Pezzolato drum chippers, whose drum diameter measures 1000 mm (3′ 3.37”). Its feeding mouth is 1200 mm (3′ 11.24”) wide.

Able to produce up to 250 m3 chips per hour, it guarantees high throughput.

The HACKERTRUCK series chippers are mounted on trucks with 3 or 4 axles and are characterised by high power and performance combined with great maneuverability and versatility.

In HACKERTRUCK chippers the drive system can use the same engine as the truck in order to eliminate an auxiliary one, so as to unburden the vehicle and to increase the manovrability.

They can be customised with many settings to make them more versatile to all working condition and are therefore appreciated by large contractors who have to move quickly on many different sites.

The Pezzolato solid drum, well-known for reliability, wear-resistance and no maintenance, has been designed to guarantee the best quality wood chips, either small or big dimensions.

It is staggered section type in order to distribute the machine’s effort equally, reducing vibrations, noise and consumption.

The sharp cut through the blades and the large drum’s inertia reduce the machine’s efforts and stress, thus confirming the well-known solidity of Pezzolato wood chippers.

TECHNICAL DATA		PTH 1200/1000
Diesel engine power	hp/kW	510/375 - 750/551
Max chipping diameter soft wood	mm/in	800 mm / 31.50''
Max chipping diameter hard wood	mm/in	550 mm / 21.65''
Maximum inlet passage	mm/ft	1200 x 1100 mm / 3' 11.24'' x 3' 7.31''
Knives	n°	5/10
Hourly throughoutput	m³/h	until 250
Drum diameter	mm/ft	1000 mm / 3' 3.37''
Drum width	mm/ft	1200 mm / 3' 11.24''
Hooked steel feeding conveyor width	mm/ft	1200 mm / 3' 11.24''
Hooked steel feeding conveyor lenght	mm/ft	2200 mm / 7' 2.61''
Hopper width	mm/ft	2200 mm / 7' 2.61''

GALLERY

Driven by VOLVO truck's engine, 750 Hp power

Driven by SCANIA truck's engine, 650 Hp power

Driven by VOLVO truck's engine, 750 Hp power

EXTRAS AND CONFIGURATIONS

FORESTRY CRANES

Forestry cranes, with or without cabin, in customised configuration

DISCHARGE BELT

Discharge belt, to obtain betterquality chips

HOPPER EXTENSION

Hydraulically folding hopper extension, to easily introduce certain types of wood

REDUCED TRACK

Reduced track improves handling characteristics allowing possibly to travel those forest tracks not normally accessible by vehicles of this type.

RECOVERING COLLECTING SCREWS

Recovering collecting screws, under the lower feeding roller, to keep the working area clean

RADIATOR INCREASED

Radiator for the coolant increased to reduce overheating of the motor and positionated externally to allow for a quick cleaning while working in a stationary position.

ADDITIONAL ENGINE

Additional engine for hydraulic drive chipper and forestry loader.

MACHINE SET UP ON A TRUCK WITH 3 AXLES

LCD COLOR DISPLAY AND EXPECTIVE CAMERAS

LCD color Display and inspection camera

MACHINE SET UP ON A TRUCK WITH 4 AXLES

SIEVING GRIDS

Sieving grids for chip calibration with different sizes, easy to replace

TRASMISSION GROUP

It transfers the truck power to the chipper with maximum torque of 2500 Nm

SPECIAL DRUM

Special drum to produce extra size chips: it improves production capacity 15% and reduces fuel consumption 16%