The “Tornado” version of the PTH 1400/820 chipper. It is a new Hackertruck model set up on a 510 HP MAN 6×6 truck, a rotating cab with high visibility and comfort for the operator both in the transport position and in the working position.
This version is characterized by the hydraulic fan positioned in the center of the vehicle, which also allows unloading in front of the cab, in addition to the usual side and rear positions; the vehicle also has the possibility of moving along the pile of wood in working position, without interrupting the movement of the drum. A technical solution particularly appreciated by the operators, as it guarantees greater speed in movement on site and consequently greater production. Discover all Pezzolato wood chippers.
TECHNICAL DATA | PTH 1400/820 TORNADO | |
---|---|---|
Diesel engine power | hp/kW | 510-540/375-397 |
Max chipping diameter soft wood | mm/in | 600 |
Max chipping diameter soft wood | mm/in | 450 |
Maximum inlet passage | mm/in | 1400 x 900 |
Knives | n° | 5 |
Hourly throughoutput | m³/h | up to 200 |
Drum diameter | mm/in | 820 |
Drum width | mm/in | 1400 |
Feeding channel width | mm | 1400 |
Feed table length | mm | 2200 |
2200 |
SUPPLEMENTARY TUBE
Supplementary tube to eject the chips in front of the cab of the truck in limited spaces.
C-SHAPED WOOD-SPLITTER
C-shaped wood-splitter with or without chain saw
HYDRAULIC FAN
The chips expulsion fan with continuous speed regulation allows adjusting the speed to the real necessities, decreasing energy need.
FORESTRY CRANES
Forestry cranes, with or without cabin, in customised configuration
DISCHARGE BELT
Discharge belt, to obtain betterquality chips
RECOVERING COLLECTING SCREWS
Recovering collecting screws, under the lower feeding roller, to keep the working area clean
REDUCED TRACK
Reduced track improves handling characteristics allowing possibly to travel those forest tracks not normally accessible by vehicles of this type.
MACHINE SET UP ON A TRUCK WITH 3 AXLES
RADIATOR INCREASED
Radiator for the coolant increased to reduce overheating of the motor and positionated externally to allow for a quick cleaning while working in a stationary position.
MACHINE SET UP ON A TRUCK WITH 4 AXLES
LCD COLOR DISPLAY AND EXPECTIVE CAMERAS
LCD color Display and inspection camera
SIEVING GRIDS
Sieving grids for chip calibration with different sizes, easy to replace
TRASMISSION GROUP
It transfers the truck power to the chipper with maximum torque of 2500 Nm
SPECIAL DRUM
Special drum to produce extra size chips: it improves production capacity 15% and reduces fuel consumption 16%
HYDRAULICALLY BENDING HOPPER
Hydraulically bending hopper, to chip very long wood
- BALCK-BOX CONTROL
Black-box control to capture data on site and transfer directly to a central information point
- HYGROMETER
Hygrometer to continuously measure the humidity of the wood chips and allow an immediate qualitative assessment of the product.
- REVERSIBLE FANS FOR RADIATOR CLEANING
Reversible fans for radiator cleaning, to clean the motor radiator and save fuel
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US