PTH 40.70
PTH 40.70
GREENLINE Chippers Power take off tractor
A chipper with an open or closed drum depending on the need.
The machine has the sturdy structure of Pezzolato chippers, guaranteeing reliability and excellent performance.
The width of the loading chute allows to easily feed large volumes of material, also when using mechanical means (the opening is 640 x 400mm). For manual feeding the chipper is equipped with a sturdy safety bar that keeps the operator safe during use.
A large horizontal roller with hooks, aided by a feed conveyor inside the hopper (on request a second feed conveyor can be supplied for the hopper tipper), allows material to be easily fed into the machine.
The interchangeable calibration grid allows to choose the dimensions of the chips and ensures that they are uniform and even.
The discharge fan, with interchangeable volutes, allows the wood chips to be expelled smoothly through the discharge pipe, which is equipped with an adjustable deflector at the end.
The main wearing parts are specially designed for easy replacement, as well as having a low cost.
Discover Pezzolato’s range of drum chippers.
| TECHNICAL DATA | PTH 40.70 | ||
|---|---|---|---|
| Minimum tractor power | hp/kW | 70/52 | |
| Maximum power of the tractor | hp/kW | 130/96 | |
| Max chipping diameter soft wood | mm/in | 400 mm / 15.75'' | |
| Max chipping diameter hard wood | mm/in | 300 mm / 11.81'' | |
| Maximum inlet passage | mm/in | 640 x 400 mm / 25.20 x 15.75'' | |
| Knives | n° | 3/4/8 | |
| Hourly throughoutput | m³/h | 20 ÷ 25 | |
| Drum diameter | mm/in | 520 mm / 20.47'' | |
| Drum width | mm/in | 640 mm / 25.20'' | |
| Hooked steel feeding conveyor width | mm/in | 650 mm / 25.59'' | |
| Hooked steel feeding conveyor lenght | mm/in | 500 mm / 19.69'' | |
| Weight | kg/lbs | 3500 kg / 7716 lbs |
GALLERY
Driven by PTO tractor, 120 Hp power
Driven by PTO tractor, 150 Hp power
Driven by PTO tractor, 115 Hp power
Driven by PTO tractor, 130 Hp power
Driven by PTO tractor, 140 Hp power
EXTRAS AND CONFIGURATIONS
Radio remote control
Radio remote control, to manage the chippers main activities at a distance
Electronic controller with 5" "touch screen" panel
SECURITY BAR
Removable security bar, for hand feeding
FORESTRY CRANES
Forestry cranes, with or without cabin, in customised configuration
LOW-OR HIGH-SPEED TOWING TRAILER
Low- or high-speed towing trailer, with air or hydraulic brakes
PULLEY-BELT DEVICE
Pulley-belt device between cardan shaft and drum, lowering the height of the cardan at 60 cm from the ground
HOPPER WITH FEEDING CHAIN
Hopper with feeding chain, hydraulic drive, to increase the aggressiveness of the machine feeding.
Other extras and configurations
- Wear–resistant Hardox metal sheets for discharging fan
- HYDRAULIC ORIENTATION DISCHARGE TUBE
Hydraulic orientation (deflector rotation and direction) discharge tube
- NO STRESS ELECTRONIC DEVICE
NO STRESS electronic device, available on all standard machines, automatically regulating the in-feed of material according to the available power
- SIEVING GRIDS
Sieving grids for chip calibration with different sizes, easy to replace
INFORMATION REQUEST
70 hp / 52 kW Minimum required tractor power
400 mm / 15.75'' Maximum chipping diameter
640 x 400 mm / 25.20 x 15.75'' Maximum inlet passage
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US