GREENLINE

PTH 900
GREENLINE Chippers Power take off tractor


PTH 900 is one of the medium power machines within Pezzolato drum chippers, whose drum diameter measures 660 mm (25.98”).

Its feeding mouth is 950 mm (3′ 1.40”) wide.

Able to produce up to 100 m³ chips per hour, it guarantees high throughput.

The design of the conical hopper (without bottlenecks that tend to trap the material), combined with a catenary system able to move the material directly to the drum, allows feeding of bulk material.

The large fan (1250 mm) mounted directly on the drum shaft is able to work at a low speed (less than 600 revs) to help reduce dust and increase wood chip quality.

Each standard installation includes a single axis trailer which provides compactness and increases agility and manoeuvrability in tight spaces.

The wear parts of all machines are cost effective and simple to replace in short maintenance times.

The drum with cuttinng system interchangeable where required, makes these chippers ideal for the production of wood chips used with domestic boilers, large power plants or gasifiers.

The integrated computer suggests any ordinary and extraordinary maintenace operations to be performed according to the manufacturer’s maintenance.

Sgranatori a tamburo Pezzolato

 


TECHNICAL DATA PTH 900
Minimum tractor power hp/kW 140/105
Maximum power of the tractor hp/kW 280/209
Max chipping diameter soft wood mm/in 500 mm / 19.69''
Max chipping diameter hard wood mm/in 350 mm / 13.78''
Maximum inlet passage mm/in 950 x 600 mm / 3' 1.40'' x 23.62''
Knives 4/8
Hourly throughoutput m³/h until 100
Drum diameter mm/in 660 mm / 25.98''
Drum width mm/ft 950 mm / 3' 1.40''
Hooked steel feeding conveyor width mm/ft 950 mm / 3' 1.40''
Hooked steel feeding conveyor lenght mm/ft 2200 mm / 7' 2.61''
Weight kg/lbs 8500 kg / 18739 lbs

GALLERY


Driven by VALTRA tractor, 250 Hp power

Driven by JOHN DEERE tractor, 300 Hp power

Driven by FENDT tractor, 200 Hp power

Driven by NEW HOLLAND tractor, 190 Hp power

Driven by MASSEY FERGUSON tractor, 260 Hp power

Driven by DEUTZ FAHR tractor, 250 Hp power

EXTRAS AND CONFIGURATIONS

SIEVING GRIDS

Sieving grids for chip calibration with different sizes, easy to replace

BENDING HOPPER (STANDARD)

Bending hopper (2°), to chip very long wood

HYDRAULIC TRACTION

Hydraulic traction, to easily move the machine in impervious paths

C-SHAPED WOOD-SPLITTER

C-shaped wood-splitter with or without chain saw

RADIO REMOTE CONTROL

Radio remote control to manage the chipper’s main activities at a distance

LOW-OR HIGH-SPEED TOWING TRAILER

Low- or high-speed towing trailer, with air or hydraulic brakes

FORESTRY CRANES

Forestry cranes, with or without cabin, in customised configuration

Other extras and configurations

-  COLLAPSIBLE COUNTER-BLADE

Collapsible counter-blade secured with shear bolts

-  DRIVE-LINE HOPPER

Drive-line hopper, to feed the machine with voluminous material

-  MOUNT ON FORESTRY TRAILERS AND FORWARDERS

PTO and Diesel Engine powered chippers are available to mount on Forestry trailers and forwarders.

-  INTEGRATED CONTAINER

Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles

INFORMATION REQUEST


    Address*

    City*

    Province*

    ZIP*



    > DRIVES AVAILABLE FOR THIS MODEL
    Power take off tractorAutonomous motor
    > IN EVIDENCE

    140 Hp / 105 kW
    Minimum required tractor power

    500 mm / 19.69''
    Maximum chipping diameter

    950 x 600 mm / 3' 1.40'' x 23.62''
    Maximum inlet passage
    > DRIVES AVAILABLE FOR THIS MODEL
    Power take off tractorAutonomous motor

    DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
    REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
    CONTACT US