GREENLINE

PTH 700
GREENLINE Chippers Power take off tractor


PTH 700 is one of the medium power machines within Pezzolato drum chippers, whose drum diameter measures 660 mm (25.98”).

Its feeding mouth is 640 mm (25.20”) wide.

Able to produce up to 80 m³ chips per hour, it guarantees high throughput.

The design of the conical hopper (without bottlenecks that tend to trap the material), combined with a catenary system able to move the material directly to the drum, allows feeding of bulk material.

The large fan (1250 mm) mounted directly on the drum shaft is able to work at a low speed (less than 600 revs) to help reduce dust and increase wood chip quality.

Each standard installation includes a single axis trailer which provides compactness and increases agility and manoeuvrability in tight spaces.

The wear parts of all machines are cost effective and simple to replace in short maintenance times.

The drum with cuttinng system interchangeable where required, makes these chippers ideal for the production of wood chips used with domestic boilers, large power plants or gasifiers.

The integrated computer suggests any ordinary and extraordinary maintenace operations to be performed according to the manufacturer’s maintenance.


TECHNICAL DATA PTH 700
Minimum tractor power hp/kW 120/90
Maximum power of the tractor hp/kW 220/165
Max chipping diameter soft wood mm/in 500 mm / 19.69''
Max chipping diameter hard wood mm/in 350 mm / 13.80''
Maximum inlet passage mm/in 640 x 600 mm / 25.20 x 23.62''
Knives 3
Hourly throughoutput m³/h until 80
Drum diameter mm/in 660 mm / 25.98''
Drum width mm/in 640 mm / 25.20''
Hooked steel feeding conveyor width mm/in 640 mm / 25.20''
Hooked steel feeding conveyor lenght mm/ft 2200 mm / 7' 2.61''
Weight kg/lbs 5700 kg / 12566 lbs

GALLERY


Driven by FENDT tractor, 240 Hp power

Driven by MASSEY FERGUSON tractor, 260 Hp power

Driven by LAMBORGHINI tractor, 160 Hp power setting to produce small size wood chips

EXTRAS AND CONFIGURATIONS

HYDRAULIC TRACTION

Hydraulic traction, to easily move the machine in impervious paths

C-SHAPED WOOD-SPLITTER

C-shaped wood-splitter with or without chain saw

RADIO REMOTE CONTROL

Radio remote control to manage the chipper’s main activities at a distance

Electronic controller with 5" "touch screen" panel

FORESTRY CRANES

Forestry cranes, with or without cabin, in customised configuration

LOW-OR HIGH-SPEED TOWING TRAILER

Low- or high-speed towing trailer, with air or hydraulic brakes

BENDING HOPPER (STANDARD)

Bending hopper (2°), to chip very long wood

Other extras and configurations

-  DRIVE-LINE HOPPER

Drive-line hopper, to feed the machine with voluminous material

-  Wear–resistant Hardox metal sheets for discharging fan

-  MOUNT ON FORESTRY TRAILERS AND FORWARDERS

PTO and Diesel Engine powered chippers are available to mount on Forestry trailers and forwarders.

-  3 POINT HITCH ATTACHMENT

3 point hitch attachment, to compact the machine and work in narrow places

-  INTEGRATED CONTAINER

Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles

-  COLLAPSIBLE COUNTER-BLADE

Collapsible counter-blade secured with shear bolts

INFORMATION REQUEST


    Address*

    City*

    Province*

    ZIP*



    > DRIVES AVAILABLE FOR THIS MODEL
    Autonomous motorPower take off tractor
    > IN EVIDENCE

    120 Hp / 90 kW
    Minimum required tractor power

    500 mm / 19.69''
    Maximum chipping diameter

    640 x 600 mm / 25.20 x 23.62''
    Maximum inlet passage
    > DRIVES AVAILABLE FOR THIS MODEL
    Autonomous motorPower take off tractor

    DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
    REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
    CONTACT US