The smaller model of the 660 series of Pezzolato drum chippers.
This particular machine is ideal for those who produce wood chips as fuel for domestic heating systems, for agricultural tourism, hotels, greenhouses, schools, or for those who simply need to reduce the debris from pruning.
It can be fed manually or using a mechanical loader.
The entry of material is facilitated by a feed conveyor inside the hopper (on request a second feed conveyor can be supplied for the hopper tipper).
The combined action of the belt and upper roller facilitates the introduction of bulk material, even using mechanical loaders.
Routine maintenance and the replacement of knives can be perfermed extremely quickly and easily thanks to the “total” lifting of the feed roller.
|Diesel engine power
|Max chipping diameter soft wood
|400 mm / 15.75''
|Max chipping diameter hard wood
|300 mm / 11.81''
|Maximum inlet passage
|500 x 400 mm / 19.69 x 15.75''
|2 - 3
|20 ÷ 30
|660 mm / 25.98''
|480 mm / 18.90''
|Hooked steel feeding conveyor width
|500 mm / 19.69''
|Hooked steel feeding conveyor lenght
|550 mm / 21.65''
|4200 kg / 9259 lbs
C-shaped wood-splitter with or without chain saw
Sieving grids for chip calibration with different sizes, easy to replace
Hydraulic traction, to easily move the machine in impervious paths
LOW-OR HIGH-SPEED TOWING TRAILER
Low or high-speed towing trailer, with air or hydraulic brakes
HOPPER WITH FEEDING CHAIN
Hopper with feeding chain, hydraulic drive, to increase the aggressiveness of the machine feeding.
Discharge belt, to obtain betterquality chips
Forestry cranes, with or without cabin, in customised configuration
Hydraulically folding hopper extension, to easily introduce certain types of wood
Electronic controller with 5" "touch screen" panel
RADIO OR CABLE REMOTE CONTROL
Radio or cable remote control, to manage the chipper's main activities at a distance
Tracks to drive the machine in roush terrain
- CHARGING ROLLERS
Charging rollers to ease the introduction of certain types of wood for stationary machines
- NO STRESS ELECTRONIC DEVICE
NO STRESS electronic device, available on all standard machines, automatically regulating the in-feed of material according to the available power
- HOOK-LIFT SYSTEM
- HYDRAULIC ORIENTATION DISCHARGE TUBE
Hydraulic orientation (deflector rotation and direction) discharge tube
- TELESCOPIC LEGS
Telescopic legs enable transportation of the chipping unit on several vehicles
- SECURITY BAR
Removable security bar, for hand feeding
- Wear–resistant Hardox metal sheets for discharging fan
- INTEGRATED CONTAINER
Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS