PTH 1000/820
PTH 1000/820
GREENLINE Chippers Power take off tractor
Medium-heavy-duty machines within the Pezzolato line of drum chippers, their drum diameter measures 820 mm.
Able to produce up to 150 m³/h of wood chips, with high yield guaranteed. The feeding mouth and the drum width distinguish the two models.
The Pezzolato solid drum, well-known for reliability, wear-resistance and no maintenance, has been designed to guarantee the best quality wood chips, either small or big dimensions. It is staggered section type in order to distribute the machine’s effort equally, reducing vibrations, noise and consumption.
The sharp cut through the blades and the large drum’s inertia reduce the machine’s efforts and stress, thus confirming the well-known solidity of Pezzolato drum chippers.
The wear spare parts of all machines are cost effective and simple to replace in short maintenance times and cheap.
The integrated computer suggests any ordinary and extraordinary maintenace operations to be performed according to the manufacturer’s maintenance plan.
| TECHNICAL DATA | PTH 1000/820 | ||
|---|---|---|---|
| Minimum tractor power | hp/kW | 200/149 | |
| Maximum power of the tractor | hp/kW | 330/246 | |
| Max chipping diameter soft wood | mm/in | 600 mm / 23.62'' | |
| Max chipping diameter hard wood | mm/in | 450 mm / 17.72'' | |
| Maximum inlet passage | mm/in | 1000 x 900 mm / 3' 3.37'' x 35.43'' | |
| Knives | n° | 4 | |
| Hourly throughoutput | m³/h | until 150 | |
| Drum diameter | mm/in | 820 mm / 32.28'' | |
| Drum width | mm/ft | 1000 mm / 3' 3.37'' | |
| Hooked steel feeding conveyor width | mm/ft | 1000 mm / 3' 3.37'' | |
| Hooked steel feeding conveyor lenght | mm/ft | 2200 mm / 7' 2.61'' | |
| Weight | kg/lbs | 11300 kg / 24912 lbs | |
| Hopper width | mm | 1800 |
GALLERY
Driven by PTO FENDT 942 VARIO tractor, 415 Hp power
EXTRAS AND CONFIGURATIONS
HYDRAULIC TRACTION
Hydraulic traction, to easily move the machine in impervious paths
DISCHARGE BELT
Discharge belt, to obtain betterquality chips
C-SHAPED WOOD-SPLITTER
C-shaped wood-splitter with or without chain saw
HYDRAULIC FAN
The chips expulsion fan with continuous speed regulation allows adjusting the speed to the real necessities, decreasing energy need.
HOPPER EXTENSION
Hydraulically folding hopper extension, to easily introduce certain types of wood
LOW-OR HIGH-SPEED TOWING TRAILER
Low- or high-speed towing trailer, with air or hydraulic brakes
RADIO REMOTE CONTROL
Radio remote control to manage the chipper’s main activities at a distance
RECOVERING COLLECTING SCREWS
Recovering collecting screws, under the lower feeding roller, to keep the working area clean
SIEVING GRIDS
Sieving grids for chip calibration with different sizes, easy to replace
SPECIAL DRUM
Special drum to produce extra size chips: it improves production capacity 15% and reduces fuel consumption 16%
Other extras and configurations
- DRIVE-LINE HOPPER
Drive-line hopper, to feed the machine with voluminous material
- HYDRAULICALLY BENDING HOPPER
Hydraulically bending hopper, to chip very long wood
- MOUNT ON FORESTRY TRAILERS AND FORWARDERS
PTO and Diesel Engine powered chippers are available to mount on Forestry trailers and forwarders.
- INTEGRATED CONTAINER
Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles
TECNOLOGIES
INFORMATION REQUEST
Autonomous motor
Power take off tractor 
200 Hp / 149 kW Minimum required tractor power
600 mm / 23.62'' Maximum chipping diameter
1000 x 900 mm / 3' 3.37'' x 35.43'' Maximum inlet passage
Autonomous motorPower take off tractor
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US