PTH 1200/1000
PTH 1200/1000
GREENLINE Chippers Autonomous motor
PTH 1200/1000 is one of the heavy duty machines to chip big diameter logs within Pezzolato drum chippers, whose drum diameter measures 1000 mm (3′ 3.37”).
Its feeding mouth is 1200 mm (3′ 11.24”) wide.
Able to produce up to 250 m³ chips per hour, it guarantees high throughput.
The Pezzolato solid drum, well-known for reliability, wear-resistance and no maintenance, has been designed to guarantee the best quality wood chips, either small or big dimensions. It is staggered section type in order to distribute the machine’s effort equally, reducing vibrations, noise and consumption.
The sharp cut through the blades and the large drum’s inertia reduce the machine’s efforts and stress, thus confirming the well-known solidity of Pezzolato drum chippers.
The wear spare parts of all machines are cost effective and simple to replace in short maintenance times and cheap.
The integrated computer suggests any ordinary and extraordinary maintenace operations to be performed according to the manufacturer’s maintenance plan.
| TECHNICAL DATA | PTH 1200/1000 | ||
|---|---|---|---|
| Diesel engine power | hp/kW | VOLVO 585KW - 796 | |
| Diesel engine power | hp/kW | CAT C18 563KW - 755HP / C27 783KW -1050 | |
| Max chipping diameter soft wood | mm/in | 800 mm / 31.50'' | |
| Max chipping diameter hard wood | mm/in | 550 mm / 21.65'' | |
| Maximum inlet passage | mm/ft | 1200 x 1100 mm / 3' 11.24'' x 3' 7.31'' | |
| Knives | n° | 5/10 | |
| Hourly throughoutput | m³/h | until 250 | |
| Drum diameter | mm/ft | 1000 mm / 3' 3.37'' | |
| Drum width | mm/ft | 1200 mm / 3' 11.24'' | |
| Hooked steel feeding conveyor width | mm/ft | 1200 mm / 3' 11.24'' | |
| Hooked steel feeding conveyor lenght | mm/ft | 2200 mm / 7' 2.61'' | |
| Weight | kg/lbs | 20000 kg / 48502 lbs |
GALLERY
Driven by VOLVO engine, 796 Hp power
Driven by CATERPILLAR C27 engine, 1150 Hp power
Driven by CATERPILLAR C18 engine, 800 Hp power
Driven by CATERPILLAR C18 engine, 800 Hp power
Driven by CATERPILLAR C27 engine, 1150 Hp power
Driven by SCANIA DC16 engine, 656 Hp power
Driven by SCANIA DC16 engine, 656 Hp power
EXTRAS AND CONFIGURATIONS
DRIVE-LINE HOPPER
Drive-line hopper, to feed the machine with voluminous material
HYDRAULIC TRACTION
Hydraulic traction, to easily move the machine in impervious paths
C-SHAPED WOOD-SPLITTER
C-shaped wood-splitter with or without chain saw
HYDRAULIC FAN
The chips expulsion fan with continuous speed regulation allows adjusting the speed to the real necessities, decreasing energy need.
SETTING UP OF SEMI-TRAILER
DISCHARGE BELT
Discharge belt, to obtain betterquality chips
TELESCOPIC LEGS
Telescopic legs enable transportation of the chipping unit on several vehicles
MACHINE SET UP ON A TRUCK WITH 4 AXLES
RADIO REMOTE CONTROL
Radio remote control to manage the chipper’s main activities at a distance
TRACKS
Tracks to drive the machine in roush terrain
RECOVERING COLLECTING SCREWS
Recovering collecting screws, under the lower feeding roller, to keep the working area clean
LCD COLOR DISPLAY AND EXPECTIVE CAMERAS
LCD color Display and inspection camera
SLIDING FRAME
Sliding frame, to expand the reach of the crane and speed up wood introduction
SIEVING GRIDS
Sieving grids for chip calibration with different sizes, easy to replace
SPECIAL DRUM
Special drum to produce extra size chips: it improves production capacity 15% and reduces fuel consumption 16%
Other extras and configurations
- REVERSIBLE FANS FOR RADIATOR CLEANING
Reversible fans for radiator cleaning, to clean the motor radiator and save fuel
- MOUNT ON FORESTRY TRAILERS AND FORWARDERS
PTO and Diesel Engine powered chippers are available to mount on Forestry trailers and forwarders.
- LOW-OR HIGH-SPEED TOWING TRAILER
Low or high-speed towing trailer, with air or hydraulic brakes
- INTEGRATED CONTAINER
Integrated container, with hydraulic pivoting, to collect chips where there is difficult access for other vehicles
- HOPPER EXTENSION
Hydraulically folding hopper extension, to easily introduce certain types of wood
- ROTATING THRUST BLOCK
Rotating thrust block (fifth wheel), to feed the machine right or left hand
- HOOK-LIFT SYSTEM
Hook-lift system
TECNOLOGIES
INFORMATION REQUEST
VOLVO 585KW - 796 Hp Diesel engine power
CAT C18 563KW - 755HP / C27 783KW -1050 Hp Diesel engine power
800 mm / 31.50'' Maximum chipping diameter
1200 x 1100 mm / 3' 11.24'' x 3' 7.31'' Maximum inlet passage
DO YOU NOT KNOW WHICH MODEL IS SUITABLE FOR YOUR NEEDS?
REQUEST A COMMERCIAL SUPPORT TO IDENTIFY THE MOST SUITABLE MACHINE FOR YOUR NEEDS
CONTACT US